Truck Mount Lime and Fertilizer LF-2420

Warren Lime & Fertilizer Spreader Body Construction:

Simple and economical hydraulic power system
Large capacity stainless steel hopper body for profitable and long life operation

All electrically welded A1011 A-45 high tensile steel
3/16″ sills which have integrally formed full length conveyor chain shield supports
Sides and ends are inverted “J” formed for hopper strength and stiffness without corrosion pockets
45 degree sides for easy material flow
3/16″ conveyor bottom panel with rear belt wiper
“Tapered-in” front and rear end gates for better material seal and reduced power requirement.
“Bolt-on” 12 gauge skid resistant surface catwalks and formed rod type rope hooks

Overall Width: 24″
Conveying Width: 18″ with a 12 “x18” maximum feedgate opening
Pintle type conveyor chain with 7/16″ hardened pins and 2 1/4″ pitch
3/8″ x 1 1/4″ cross bars are welded to every other link
Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
4″ chain idler adjustment with anti-friction bearings
Rear belt type sprocket sealers and “bolt-in” conveyor chain shields.
Hand crank type feedgate control and flow divider controls
Drive: Heavy duty 6:1 reduction gearbox w/ 2″ diameter shaft

Spreader Length	Overall Length	Cab to Axle	Capacity (cu. yds.)	Spreader Weight (lbs.)
10′	132″	84″	7.5	2620
11′	144″	84″	8.2	2725
12′	156″	102″	9.0	2920
13′	168″	108″	9.7	3025
14′	180″	120″	10.4	3130
15′	192″	120″	11.2	3235
16′	204″	132″	11.9	3340