Warren AC-2420
Stainless Steel Snow & Ice Spreader Body Construction:
Features
- Can be chassis or dump body mounted
- Ideal for the operator looking for an economical spreader with a long life
Body
- 304 Stainless Steel
- 3/16″ sills which have integrally formed full length conveyor chain shield supports
- Sides and ends are inverted “J” formed for hopper strength and stiffness without corrosion pockets
- Sides are set at 45 degrees to provide easy material flow
3/16″ conveyor bottom panel with rear belt wiper - Four corner brace lifting eyes
- “Tapered-in” front and rear end gates for better material seal and reduced power requirement.
Conveyor
- Overall Width: 24″
- Conveying Width: 18″ with a 12 “x18” maximum feedgate opening
- Pintle type conveyor chain with 7/16″ hardened pins and 2 1/4″ pitch
- 3/8″ x 1 1/4″ cross bars are welded to every other link
- Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
- 4″ chain idler adjustment with anti-friction bearings
- Rear belt type sprocket sealers and “bolt-in” conveyor chain shields.
- Hand crank type feedgate control
- Heavy duty 6:1 reduction gearbox
Spinner Assembly
- A single 22″ diameter spinner with six formed replaceable fins
- Mounted to 1 1/4″ dia. spinner shaft
- Vertically adjustable hopper assembly with 4 rod adjustable external baffles and 2 adjustable internal chute baffles
- Tilt-up spinner assembly for convenient storage
AC Body Sizes:
| Inside Hopper Length | Capacity (struck cu. yds.) | Capacity (rounded cu. yds.) | Spreader Weight (lbs.) |
| 8′ | 5.0 | 6.0 | 1900 |
| 9′ | 5.6 | 6.6 | 2040 |
| 10′ | 6.2 | 7.3 | 2150 |
| 11′ | 6.8 | 8.0 | 2290 |
| 12′ | 7.5 | 8.7 | 2535 |
| 13′ | 8.1 | 9.4 | 2695 |
| 14′ | 8.7 | 10.2 | 2845 |
| 15′ | 9.3 | 10.8 | 3095 |
| 16′ | 10.0 | 11.6 | 3295 |
AC Spreader Options:
- Dump Body Mount Kit
- Truck Chassis Mount Kit
- Stainless Steel Construction (All or Partial)
- 7″ Diameter Auger Conveyor
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Custom modifications to customer’s specs
- Special Paint / Graphics