Warren LST-3420
Litter & Compost Spreader Specifications:
Features
- Simple and economical hydraulic power system
- Large capacity stainless steel hopper body for profitable and long life operation
Body
- Welded in bed type jigs and fixtures for accurate fit & alignment
- 10 gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
- Sides/Sills and 10 gauage end gates have inverted
- “J” formed top edge for extra strength without corrosion pockets
- Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
- “Tapered-in” front and rear for better material seal and reduced power requirement
- 7 gauge (3/16″) steel conveyor bottom with angle type support stiffeners
- 12 gauge skid resistant surface catwalks serve as fenders with mud flaps
- 54″ Hopper Height; 88″ wide
Conveyor
- Overall Width: 34 “
- Conveying Width: 34″ with a 12″ x 34″ maximum feedgate opening
- 3/8″ x 1 1/4″ cross bars are welded to every fourth link
- Six tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
- 4″ chain idler adjustment with anti-friction bearings
- Hand crank type feedgate control
- UHMW Liner
Spinner Assembly
- Two 24″ diameter canted spinners
- Spinners have 3 formed replaceable fins with adjustable angle
- Protective spinner guard
Running Gear
- Chassis: Rigid frame construction of 8″ structural steel channel
- Hitch Pin: Adjustable height, single pin with safety chains
- Axles: Single, Rigid with 19L x 16.1 Farm Flotation Tires
- Axles: Tandem Walking Beam Suspension with 12.5L x 15 Tires or 16.5L x 16.1 Flotation Tires
Pull Type Litter and Compost Spreader Sizes:
| Spreader Length | Capacity (cu. yds) |
|---|---|
| 14′ | 11.3 |
| 16′ | 12.9 |
| 18′ | 14.6 |
| 20′ | 16.2 |
| 22′ | 17.8 |
| 24′ | 19.4 |
Pull Type Litter Spreader Options:
- 30″ Spinner Discs
- 1000 RPM PTO Drive Line
- Inverted “V” Divider
- 60° Hopper Sides
- 201 or 304 Stainless Steel Construction (All or Partial)
- #3 Chain Conveyor w/ Bar Every Link
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Special Paint / Graphics