Heavy Duty Lime and Fertilizer Spreader LF-3020

HD Lime & Fertilizer Spreader Body Construction:

A-45 High Tensile Steel Construction
3/16″ sills which have integrally formed full length conveyor chain shield supports
Sides and ends are inverted “J” formed for hopper strength and stiffness without corrosion pockets
10 gauge 45 degree sides for easy material flow
3/16″ (7 gauge) conveyor bottom panel with rear belt wiper
“Tapered-in” front and rear end gates for better material seal and reduced power requirement.
“Bolt-on” skid resistant surface catwalks and formed rod type rope hooks (12 gauge)

Overall Width: 30″
Conveying Width: 24″ with a 12 “x24” maximum feedgate opening
Pintle type conveyor chain with 7/16″ hardened pins and 2 1/4″ pitch
3/8″ x 1 1/4″ cross bars are welded to every other link
Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
4″ chain idler adjustment with anti-friction bearings
Rear belt type sprocket sealers and “bolt-in” conveyor chain shields.
Hand crank type feedgate control and flow divider controls
Drive: Heavy duty 6:1 reduction gearbox w/ 2″ diameter shaft

Spreader Length	Overall Length	Cab to Axle	Capacity (cu. yds.)	Spreader Weight (lbs.)
10′	132″	84″	8.2	2670
11′	144″	84″	9.1	2780
12′	156″	102″	9.9	2890
13′	168″	108″	10.7	3050
14′	180″	120″	11.5	3160
15′	192″	120″	12.3	3320
16′	204″	132″	13.2	3430