Warren LST-3420
Litter & Compost Spreader Specifications:
- Simple and economical hydraulic power system
- Large capacity stainless steel hopper body for profitable and long life operation
- Welded in bed type jigs and fixtures for accurate fit & alignment
- Stainless steel sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
- Sides/Sills and stainless steel end gates have inverted “J” formed top edge for extra strength without corrosion pockets
- Full slope stainless steel trapezoidal side supports are located at each cross sill and hold sides at a 60 degree angle
- “Tapered-in” front and rear for better material seal and reduced power requirement
- Stainless steel conveyor bottom with angle type support stiffeners
- Stainless steel skid resistant surface catwalks serve as fenders with mud flaps
- 54″ Hopper Height; 88″ wide
- Overall Width: 34"
- Conveying Width: 34″ with a 12″ x 34″ maximum feedgate opening
- 3/8″ x 1 1/4″ cross bars are welded to every fourth link
- Six tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
- 4″ chain idler adjustment with anti-friction bearings
- Hand crank type feedgate control
- UHMW Liner
- Two 30″ diameter canted spinners
- Spinners have 3 formed replaceable fins with adjustable angle
- Protective spinner guard
- Chassis: Rigid frame construction of 8″ structural steel channel
- Hitch Pin: Adjustable height, single pin with safety chains
- Axles: Single, Rigid with 19L x 16.1 Farm Flotation Tires
- Axles: Tandem Walking Beam Suspension with 12.5L x 15 Tires or 16.5L x 16.1 Flotation Tires
Pull Type Litter and Compost Spreader Sizes:
| Spreader Length | Capacity (cu. yds) |
|---|---|
| 14′ | 8.6 |
| 16′ | 9.9 |
| 18′ | 11.2 |
| 20′ | 12.5 |
| 22′ | 13.8 |
| 24′ | 15.1 |
Pull Type Litter and Compost Spreader Options:
- 24″ Spinner Discs
- 24″ Spinner Discs
- 1000 RPM PTO Drive Line
- Inverted “V” Divider
- 45° Hopper Sides
- Steel Construction (All or Partial)
- #3 Chain Conveyor w/ Bar Every Link
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Special Paint / Graphics