Warren E/AC-2420
Stainless Snow & Ice Spreader Body Construction:
Features
- Can be chassis or dump body mounted
- Uni-hopper design eliminates many corrosion pockets for longer spreader life
Body
- 304 Stainless Steel Construction
- Stainless Steel sides and sills are formed from one steel sheet so there are no seams in spreader sides to cause corrosion pockets.
- Chain shields are formed insto side/sill providing additional longitudinal rigidity and protects the chain from material in hopper.
- Top edge of sides and ends are inverted “J” formed for improved hopper strength and ease of maintenance.
- Full slope steel side supports are located at each 1/2″ x 2″ bar cross sill and hold sides at a 45 degree angle.
- Both ends are tapered in for better material seal and reduced conveyor load
Conveyor
- Overall Width: 24″
- Conveying Width: 18″ with a 12 “x18” maximum feedgate opening
- Pintle type conveyor chain
- 3/8″ x 1 1/4″ cross bars are welded to every other link
- Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
- 4″ chain idler adjustment with anti-friction bearings
- Rear belt type sprocket sealers
- Hand crank type feedgate control
- Heavy Duty 6:1 reduction gearbox
- Low speed high torque hydraulic motor integrally mounted to gearbox
Spinner Assembly
- A single 18 ” diameter spinner with six formed replaceable fins
- Directly mounts to the low speed high torque hydraulic motor shaft
- One fixed and 3 rod adjustable external baffles
2 adjustable internal baffles - Tilt up spinner assembly for convenient storage
E/AC Body Sizes:
| Inside Hopper Length | Capacity (struck cu. yds.) | Capacity (rounded cu. yds.) | Spreader Weight (lbs.) |
| 8′ | 5.0 | 6.0 | 1726 |
| 9′ | 5.6 | 6.7 | 1866 |
| 10′ | 6.3 | 7.4 | 1966 |
| 11′ | 6.9 | 8.0 | 2106 |
| 12′ | 7.6 | 8.8 | 2206 |
| 13′ | 8.2 | 9.5 | 2346 |
| 14′ | 8.9 | 10.3 | 2450 |
| 15′ | 9.6 | 11.1 | 2590 |
| 16′ | 10.0 | 11.6 | 2730 |
E/AC Spreader Options:
- 60° Hopper Sides
- Dump Body Mount Kit
- Truck Chassis Mount Kit
- Mild Steel Construction (All or Partial)
- 7″ Diameter Auger Conveyor
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Custom modifications to customer’s specs
- Special Paint / Graphics