Featured Spreader of the Month

18 ft Litter Spreader – FOR SALE

18 ft litter spreader

This month’s featured Spreader of the Month is an 18 ft litter spreader. This spreader is currently located in Talco, TX, and is ready for immediate delivery or pickup. We are offering SPECIAL spring pricing on this great unit just in time for your busy season!

This pull-type litter spreader has 24” spinners, an inverted “V” inside the body, and a 667 #4 Pintle Chain (bar every 4th Link). This 18 ft litter spreader has 14.4 cubic yard capacity and 54” height. The sides are constructed from 10 ga steel, while the pan is 7 ga steel. The conveyer is our standard width, 34” for optimum material unloading. This unit has a hand crank to raise and lower the gate.

This month’s featured unit has a Tandem Walking Beam Suspension and  19.5L x 16.1 Flotation tires. The PTO drive line is 1000 RPM and the unit has a 35 gallon steel hydraulic tank.

For more information about this great unit, contact Chris at 888-734-4400 or 903-379-3921.

Visit our Texas location’s website at truckandtrailer.com for more information about the facility and our full line of products!

Read More


Warren LS and LF Spreaders

Litter Spreader Trucks for Sale

 

Warren has several litter spreader trucks for sale in our various locations. It is prime season to invest in a new litter truck for your farm or operation! We know how difficult it can be to find a good, used truck, so we’ve taken that hassle out of the equation for you. All of the units below are mounted and ready for immediate delivery or pick up! Below you will find links to flyers on several available litter spreader trucks for sale with information on their location, truck spec, and spreader spec. There is also contact information for our sales rep, Drew, in Birmingham, AL.

FORD 2004 WARREN LS3420

STERL 2015 WARREN LS3420

Warren 2015 LS-3420 18′ 2

FORD 2015 WARREN LS3420

FREIGH 2015 WARREN LF2420-11′

Our standard spreaders are very heavy duty, offering features that our competitors would consider as “optional” as our standard equipment. We have 30” spinners, a heavy duty chain, poly floor liner, and a dual pump just to name a few of our excellent standard features.

We have both gas and diesel units available, as well as 16′ and 18′ spreaders. If you do not see the exact fit for you, we would love to build a spreader to your specifications. We offer our truck mounted units, as well as trailer/pull-type units built to meet your needs. All you have to do is call one of our dedicated sales reps to find out more information and ask for a quote. Contact them at 800-228-4842 or 800-900-2545 for a quote today!

We also keep all of our current spreader inventory on TractorHouse. Be sure to check their page frequently for all Warren inventory updates.

Read More


Spreader of the Month: LST-3420-20

20 ft Litter Spreader

This month’s spreader of the month is a Warren LST-3420-20, a 20 ft litter spreader. This spreader was shipped this week to one of our great customers in Washington. This customer already has, and will continue to utilize, one of our 14 ft litter spreaders. Due to large growth, they were ready to purchase this 20 ft litter spreader to add to their equipment. The customer grows for both Amway and Gaia Herbs and our litter spreaders will help them keep their botanicals properly fertilized!  We are very excited to be part of their success and expansion!

No matter the size of the farm or project, our LST-3420 can be tailored to fit your specific needs. With sizes ranging from 14′ to 24′, our litter spreaders can be used for any job to spread chicken litter, sawdust, shavings, compost, rice hulls, or other organic material.

20 ft litter spreader

Our LST-3420 spreaders come standard with the following specifications:

  • Welded in bed type jigs and fixtures for accurate fit & alignment
  • 10 gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
  • Sides/Sills and 10 gauage end gates have inverted “J” formed top edge for extra strength without corrosion pockets
  • Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
  • “Tapered-in” front and rear for better material seal and reduced power requirement
  • 7 gauge (3/16″) steel conveyor bottom with angle type support stiffeners
  • 12 gauge skid resistant surface catwalks serve as fenders with mud flaps

For more information about our litter spreaders, or other spreader models, please call us today at 800.228.4842!

Read More


Spreader of the Month

18 ft Litter Spreader

This month’s spreader of the month is a green LST-3420-18 litter spreader! Warren has several litter spreaders in both 16 ft and 18 ft designs in stock and ready for pickup or delivery. This 18 ft litter spreader boasts the following features:

  • Welded in bed type jigs and fixtures for accurate fit & alignment
  • 10 gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
  • Sides/Sills and 10 gauge end gates have inverted “J” formed top edge for extra strength without corrosion pockets
  • Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
  • “Tapered-in” front and rear for better material seal and reduced power requirement
  • 7 gauge (3/16″) steel conveyor bottom with angle type support stiffeners
  • 12 gauge skid resistant surface catwalks serve as fenders with mud flaps
  • Conveyer: 34” conveyer with #1 heavy duty chain (bar every 4th link)

JPEG image-E3110839C3DE-118 ft litter spreaderJPEG image-4B4916B6AEE0-1

The spinners are 30” with replaceable fins and adjustable angle. They are protected with a spinner guard for increased safety. We have both red and green spreaders currently available, and can build any of our spreaders to match your specifications and needs. For more information on this 18 ft litter spreader, please contact our Collins, MS, office at 601.765.8221.

We have dedicated sales managers standing by to answer any and all of your spreader questions. When you choose Warren for your spreader needs, you are not only getting a superior product, but also excellent customer service. With locations in Texas, Mississippi, Alabama, Florida, and South Carolina, we have your service needs covered.

To talk to one of our dedicated sales representatives, call 800.228.4842.

Read More