Contact Us: +1 800-228-4842
Spreaders - Ag, Ice Control, Specialty
  • Home
  • Company
    • About Us
    • News/Blog
    • Our Team
  • Products
    • Ag Spreaders
      • Litter Spreaders
      • Lime and Fertilizer
    • Snow and Ice Control Spreaders
      • Tailgate
    • Specialty
  • Parts & Service
  • Contact

Portfolio


Products
  • Home
  • |
  • Pull Type Litter, Shavings, and Compost LST-3420
  • |
  • Agricultural
  • |
  • Pull Type Litter, Shavings, and Compost LST-3420
Pull Type Litter Spreader

Pull Type Litter and Compost Spreaders

The Warren LST-3420 is a hydraulic powered spreader trailer for spreading lightweight bulk material such as: chicken litter, sawdust, shavings, compost, rice hulls, or other organic material. 

Warren LST-3420

  • Simple and economical hydraulic power system
  • Large capacity steel hopper body for profitable and long life operation

 

Download Literature

Litter & Compost Spreader Specifications:

  • Body
  • Conveyor
  • Spinner Assembly
  • Running Gear
    • Welded in bed type jigs and fixtures for accurate fit & alignment
    • 10 gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
    • Sides/Sills and 10 gauage end gates have inverted "J" formed top edge for extra strength without corrosion pockets
    • Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
    • "Tapered-in" front and rear for better material seal and reduced power requirement
    • 7 gauge (3/16") steel conveyor bottom with angle type support stiffeners
    • 12 gauge skid resistant surface catwalks serve as fenders with mud flaps
    • 54" Hopper Height; 88" wide
    • Overall Width: 34 "
    • Conveying Width: 34" with a 12" x 34" maximum feedgate opening
    • 3/8" x 1 1/4" cross bars are welded to every fourth link
    • Six tooth steel sprockets mounted to 1 1/2" diameter idler shaft and 2" diameter drive shaft
    • 4" chain idler adjustment with anti-friction bearings
    • Hand crank type feedgate control
    • UHMW Liner
    • Two 24" diameter canted spinners
    • Spinners have 3 formed replaceable fins with adjustable angle
    • Protective spinner guard
    • Chassis: Rigid frame construction of 8" structural steel channel
    • Hitch Pin: Adjustable height, single pin with safety chains
    • Axles: Single, Rigid with 19L x 16.1 Farm Flotation Tires
    • Axles: Tandem Walking Beam Suspension with 12.5L x 15 Tires or 16.5L x 16.1 Flotation Tires

    Inverted V

    Pull Type Litter and Compost Spreader Sizes:

    Spreader Length 14' 16' 18' 20' 22' 24' 
    Capacity (cu. yds) 11.3 12.9 14.6 16.2 17.8 19.4 

    Pull Type Litter Spreader Options:

    • 30" Spinner Discs
    • 1000 RPM PTO Drive Line
    • Inverted "V" Divider
    • 60°  Hopper Sides
    • 201 or 304 Stainless Steel Construction (All or Partial)
    • #3 Chain Conveyor w/ Bar Every Link 
    • #6 Stainless Steel Mesh Chain Conveyor
    • Tarp System
    • Rate Controllers
    • GPS Guidance Systems
    • Hydraulic Operated Feedgate
    • Electric on/off Cab Control for Conveyor
    • Special Paint / Graphics

     

    © Copyright 2018 Warren, Inc.