Heavy Duty Snow & Ice Control Spreaders
The Warren E/AC-2420 is a heavy duty all hydraulically powered spreader. The E/AC is capable of spreading abrasives and chemicals for snow and ice control, seal coating, and dust control.
- Can be chassis or dump body mounted
- Uni-hopper design eliminates many corrosion pockets for longer spreader life
Snow & Ice Spreader Body Construction:
- All electrically welded ASTM-A1011 A-45 high tensile steel
- Steel sides and sills are formed from one steel sheet so there are no seams in spreader sides to cause corrosion pockets.
- Chain shields are formed insto side/sill providing additional longitudinal rigidity and protects the chain from material in hopper.
- Top edge of sides and ends are inverted "J" formed for improved hopper strength and ease of maintenance.
- Full slope steel side supports are located at each 1/2" x 2" steel bar cross sill and hold sides at a 45 degree angle.
- Both ends are tapered in for better material seal and reduced conveyor load
- Overall Width: 24"
- Conveying Width: 18" with a 12 "x18" maximum feedgate opening
- Pintle type conveyor chain
- 3/8" x 1 1/4" cross bars are welded to every other link
- Eight tooth steel sprockets mounted to 1 1/2" diameter idler shaft and 2" diameter drive shaft
- 4" chain idler adjustment with anti-friction bearings
- Rear belt type sprocket sealers
- Hand crank type feedgate control
- Heavy Duty 6:1 reduction gearbox
- Low speed high torque hydraulic motor integrally mounted to gearbox
- A single 18 " diameter spinner with six formed replaceable fins
- Directly mounts to the low speed high torque hydraulic motor shaft
- One fixed and 3 rod adjustable external baffles
- 2 adjustable internal baffles
- Tilt up spinner assembly for convenient storage
E/AC Body Sizes:
|Inside Hopper Length||8'||9'||10'||11'||12'||13'||14'||15'||16'|
|Capacity (struck cu. yds.)||5.0||5.6||6.3||6.9||7.6||8.2||8.9||9.6||10.0|
(rounded cu. yds.)
E/AC Spreader Options:
- 60° Hopper Sides
- Dump Body Mount Kit
- Truck Chassis Mount Kit
- Stainless Steel Construction (All or Partial)
- 7" Diameter Auger Conveyor
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Custom modifications to customer's specs
- Special Paint / Graphics