
Heavy Duty Snow & Ice Control Spreaders
The Warren AC-2420 is a heavy duty all hydraulically powered spreader. The Warren AC-2420 can be either dump body or truck chassis mounted with a choice of either truck or auxiliary engine power.
Warren AC-2420
- Can be chassis or dump body mounted
- Ideal for the operator looking for a economical spreader with a long life
Snow & Ice Spreader Body Construction:
- All electrically welded ASTM-A1011 A-45 high tensile steel
- 3/16" sills which have integrally formed full length conveyor chain shield supports
- Sides and ends are inverted "J" formed for hopper strength and stiffness without corrosion pockets
- Sides are set at 45 degrees to provide easy material flow
- 3/16" conveyor bottom panel with rear belt wiper
- Four corner brace lifting eyes
- "Tapered-in" front and rear end gates for better material seal and reduced power requirement.
AC Body Sizes:
Inside Hopper Length | 8' | 9' | 10' | 11' | 12' | 13' | 14' | 15' | 16' | |||||||||
Capacity (struck cu. yds.) | 5.0 | 5.6 | 6.2 | 6.8 | 7.5 | 8.1 | 8.7 | 9.3 | 10.0 | |||||||||
Capacity (rounded cu. yds.) | 6.0 | 6.6 | 7.3 | 8.0 | 8.7 | 9.4 | 10.2 | 10.8 | 11.6 | |||||||||
Spreader Weight (lbs.) | 1900 | 2040 | 2150 | 2290 | 2535 | 2695 | 2845 | 3095 | 3295 |
AC Spreader Options:
- 60° Hopper Sides
- Dump Body Mount Kit
- Truck Chassis Mount Kit
- Stainless Steel Construction (All or Partial)
- 7" Diameter Auger Conveyor
- #6 Stainless Steel Mesh Chain Conveyor
- Tarp System
- Rate Controllers
- GPS Guidance Systems
- Hydraulic Operated Feedgate
- Electric on/off Cab Control for Conveyor
- Custom modifications to customer's specs
- Special Paint / Graphics