Project Description
Simple and economical hydraulic power system
Large capacity stainless steel hopper body for profitable and long life operation
Warren LS-3420
Warren Litter Spreader Body Construction:
- All electrically welded A1011 A-45 high tensile steel
- Welded in bed type jigs and fixtures for accurate fit & alignment
- 10 Gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
- Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
- “Tapered-in” front and rear for better material seal and reduced power requirement
- 7 Gauge (3/16″) steel conveyor bottom with angle type support stiffeners
- 12 Gauge skid resistant surface catwalks serve as fenders with mud flaps
- Overall Width: 34″
- Conveying Width: 18″ with a 12 “x18” maximum feedgate opening
- Pintle type conveyor chain with 7/16″ hardened pins and 2 1/4″ pitch
- 3/8″ x 1 1/4″ cross bars are welded to every other link
- Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
- 4″ chain idler adjustment with anti-friction bearings
- Rear belt type sprocket sealers and “bolt-in” conveyor chain shields.
- Hand crank type feedgate control and flow divider controls
- Drive: Heavy duty 6:1 reduction gearbox
- Two (2) 24″ diameter canted spinners
- Spinners have three (3) formed fins with adjustable angle
- Protective spinner guard

Litter Body Sizes:
Spreader Length | 12′ | 14′ | 16′ | 18′ | 20′ | 22′ | 24′ |
Cab to Axle | 84″ | 102″ | 115″ | 120″ | 132″ | 156″ | 180″+ |
Capacity (cu. yds.) |
9.7 | 11.3 | 12.9 | 14.6 | 16.2 | 17.8 | 19.4 |
Spreader Weight (lbs.) |
2545 | 2850 | 3155 | 3460 | 3765 | 4070 | 4375 |
Spreader Length |
Cab to Axle |
Capacity (cu. yds.) |
Spreader Weight (lbs.) |
---|---|---|---|
12′ | 84″ | 9.7 | 2545 |
14′ | 102″ | 11.3 | 2850 |
16′ | 115″ | 12.9 | 3155 |
18′ | 120″ | 14.6 | 3460 |
20′ | 132″ | 16.2 | 3765 |
22′ | 156″ | 17.8 | 4070 |
24′ | 180″+ | 19.4 | 4375 |
Litter Spreader Options:
Ultra low 40″ Side Height
Low Profile 44″ Side Height
60° Hopper Sides
UHMW Floor Liner
Stainless Steel Construction (All or Partial)
Tarp System
Rate Controllers
Guidance Systems
Hydraulic Operated Feedgate
Electric on/off Cab Control for Conveyor
Special Paint / Graphics