Project Description

Heavy Duty Snow & Ice Control Spreaders

The Warren E/AC-2420 is a heavy duty all hydraulically powered spreader. The E/AC is capable of spreading abrasives and chemicals for snow and ice control, seal coating, and dust control.

Download Literature

Can be chassis or dump body mounted

Uni-hopper design eliminates many corrosion pockets for longer spreader life

Warren E/AC-2420

Snow & Ice Spreader Body Construction:

  • All electrically welded ASTM-A1011 A-45 high tensile steel
  • Steel sides and sills are formed from one steel sheet so there are no seams in spreader sides to cause corrosion pockets.
  • Chain shields are formed insto side/sill providing additional longitudinal rigidity and protects the chain from material in hopper.
  • Top edge of sides and ends are inverted “J” formed for improved hopper strength and ease of maintenance.
  • Full slope steel side supports are located at each 1/2″ x 2″ steel bar cross sill and hold sides at a 45 degree angle.
  • Both ends are tapered in for better material seal and reduced conveyor load
  • Overall Width: 24″
  • Conveying Width: 18″ with a 12 “x18” maximum feedgate opening
  • Pintle type conveyor chain
  • 3/8″ x 1 1/4″ cross bars are welded to every other link
  • Eight tooth steel sprockets mounted to 1 1/2″ diameter idler shaft and 2″ diameter drive shaft
  • 4″ chain idler adjustment with anti-friction bearings
  • Rear belt type sprocket sealers
  • Hand crank type feedgate control
  • Heavy Duty 6:1 reduction gearbox
  • Low speed high torque hydraulic motor integrally mounted to gearbox
  • A single 18 ” diameter spinner with six formed replaceable fins
  • Directly mounts to the low speed high torque hydraulic motor shaft
  • One fixed and 3 rod adjustable external baffles
  • 2 adjustable internal baffles
  • Tilt up spinner assembly for convenient storage

E/AC Body Sizes:

Inside Hopper Length 8′ 9′ 10′ 11′ 12′ 13′ 14′ 15′ 16′
Capacity (struck cu. yds.) 5.0 5.6 6.3 6.9 7.6 8.2 8.9 9.6 10.0
Capacity
(rounded cu. yds.)		 6.0 6.7 7.4 8.0 8.8 9.5 10.3 11.1 11.6
Spreader Weight
(lbs.)		 1726 1866 1966 2106 2206 2346 2450 2590 2730
Inside
Hopper
Length		 Capacity
(struck
cu. yds.)		 Capacity
(rounded
cu. yds.)		 Spreader
Weight
(lbs.)
8′ 5.0 6.0 1726
9′ 5.6 6.7 1866
10′ 6.3 7.4 1966
11′ 6.9 8.0 2106
12′ 7.6 8.8 2206
13′ 8.2 9.5 2346
14′ 8.9 10.3 2450
15′ 9.6 11.1 2590
16′ 10.0 11.6 2730

E/AC Spreader Options:

  • 60°  Hopper Sides

  • Dump Body Mount Kit

  • Truck Chassis Mount Kit

  • Stainless Steel Construction (All or Partial)

  • 7″ Diameter Auger Conveyor

  • #6 Stainless Steel Mesh Chain Conveyor

  • Tarp System

  • Rate Controllers

  • GPS Guidance Systems

  • Hydraulic Operated Feedgate

  • Electric on/off Cab Control for Conveyor

  • Custom modifications to customer’s specs

  • Special Paint / Graphics