Warren GS-87 Spreader of the Month

This month’s spreader of the month was installed by Warren Truck & Trailer, Inc. in Birmingham, AL.  This dump body and spreader combination a perfect fit for most municipalities.  In fact, this truck was purchased by an Alabama county.  Because, Warren WXL series dump bodies feature AR-450 steel construction, they have longer lifespans than dump bodies manufactured using plain mild steel.  This particular dump body is a 10′ WXL with a 3/16″ AR-450 floor and 10 GA mild steel balance. In addition, adding a Warren gravity tailgate spreader further improves the functionality of this truck.  The pictured GS-87 spreader fits perfectly in the Warren dump body because the dump body has an inside width of 7′ 3″ (87″).

About Warren GS Spreaders

Warren GS series tailgate spreaders are available in two sizes.  Designed to fit 84″ and 87″ dump body inside widths.  And, these tailgate spreaders are also built to accommodate multiple tailgate heights.  Warren gravity tailgate spreaders are built with 8 sections.  Each section is 1′ wide so that the spreading width can be adjusted in easy 1′ increments.  Simply remove the the pin from the master rod to unlock each gate section.

Warren tailgate replacement spreaders are painted Omaha orange as standard.  However, custom paint colors are available as well.

So, contact your local Warren sales representative to learn more about our GS series tailgate spreaders.  We will be happy to assist you in specifying the correct tailgate spreader for your current dump body.  Or, we can help specify and quote you a Warren dump body and spreader combination package.

Read More


Featured Spreader of the Month

18 ft Litter Spreader – FOR SALE

18 ft litter spreader

This month’s featured Spreader of the Month is an 18 ft litter spreader. This spreader is currently located in Talco, TX, and is ready for immediate delivery or pickup. We are offering SPECIAL spring pricing on this great unit just in time for your busy season!

This pull-type litter spreader has 24” spinners, an inverted “V” inside the body, and a 667 #4 Pintle Chain (bar every 4th Link). This 18 ft litter spreader has 14.4 cubic yard capacity and 54” height. The sides are constructed from 10 ga steel, while the pan is 7 ga steel. The conveyer is our standard width, 34” for optimum material unloading. This unit has a hand crank to raise and lower the gate.

This month’s featured unit has a Tandem Walking Beam Suspension and  19.5L x 16.1 Flotation tires. The PTO drive line is 1000 RPM and the unit has a 35 gallon steel hydraulic tank.

For more information about this great unit, contact Chris at 888-734-4400 or 903-379-3921.

Visit our Texas location’s website at truckandtrailer.com for more information about the facility and our full line of products!

Read More


Warren LS and LF Spreaders

Litter Spreader Trucks for Sale

 

Warren has several litter spreader trucks for sale in our various locations. It is prime season to invest in a new litter truck for your farm or operation! We know how difficult it can be to find a good, used truck, so we’ve taken that hassle out of the equation for you. All of the units below are mounted and ready for immediate delivery or pick up! Below you will find links to flyers on several available litter spreader trucks for sale with information on their location, truck spec, and spreader spec. There is also contact information for our sales rep, Drew, in Birmingham, AL.

FORD 2004 WARREN LS3420

STERL 2015 WARREN LS3420

Warren 2015 LS-3420 18′ 2

FORD 2015 WARREN LS3420

FREIGH 2015 WARREN LF2420-11′

Our standard spreaders are very heavy duty, offering features that our competitors would consider as “optional” as our standard equipment. We have 30” spinners, a heavy duty chain, poly floor liner, and a dual pump just to name a few of our excellent standard features.

We have both gas and diesel units available, as well as 16′ and 18′ spreaders. If you do not see the exact fit for you, we would love to build a spreader to your specifications. We offer our truck mounted units, as well as trailer/pull-type units built to meet your needs. All you have to do is call one of our dedicated sales reps to find out more information and ask for a quote. Contact them at 800-228-4842 or 800-900-2545 for a quote today!

We also keep all of our current spreader inventory on TractorHouse. Be sure to check their page frequently for all Warren inventory updates.

Read More


Spreader of the Month: LST-3420-20

20 ft Litter Spreader

This month’s spreader of the month is a Warren LST-3420-20, a 20 ft litter spreader. This spreader was shipped this week to one of our great customers in Washington. This customer already has, and will continue to utilize, one of our 14 ft litter spreaders. Due to large growth, they were ready to purchase this 20 ft litter spreader to add to their equipment. The customer grows for both Amway and Gaia Herbs and our litter spreaders will help them keep their botanicals properly fertilized!  We are very excited to be part of their success and expansion!

No matter the size of the farm or project, our LST-3420 can be tailored to fit your specific needs. With sizes ranging from 14′ to 24′, our litter spreaders can be used for any job to spread chicken litter, sawdust, shavings, compost, rice hulls, or other organic material.

20 ft litter spreader

Our LST-3420 spreaders come standard with the following specifications:

  • Welded in bed type jigs and fixtures for accurate fit & alignment
  • 10 gauge sides/sills form the hopper sides in one piece with no horizontal seam corrosion pocket
  • Sides/Sills and 10 gauage end gates have inverted “J” formed top edge for extra strength without corrosion pockets
  • Full slope 10 gauge trapezoidal side supports are located at each cross sill and hold sides at a 45 degree angle
  • “Tapered-in” front and rear for better material seal and reduced power requirement
  • 7 gauge (3/16″) steel conveyor bottom with angle type support stiffeners
  • 12 gauge skid resistant surface catwalks serve as fenders with mud flaps

For more information about our litter spreaders, or other spreader models, please call us today at 800.228.4842!

Read More


Sunbelt Ag Expo 2015

Summary and Recap

This week, Warren attended the 2015 Sunbelt Ag Expo in Moultrie, GA. The Sunbelt Ag Expo was a great event for Warren, Inc. and marked the first trade show experience for several of Warren’s new employees. We enjoyed getting to speak with potential customers, as well as current Warren customers who attended the show. Below you will see the equipment that was taken to the show to be displayed in our exhibit area.

IMG_3429IMG_3427IMG_3440

From left to right:

Accumaxx WFT 2010 6 ton pull type lime and fertilizer spreader – stainless steel construction with a tandem axle and walking floor suspension. This unit features a mechanical powered ground wheel drive and mesh (honeycomb) chain, which is perfect for granular fertilizer. For more information and configuration options, visit the AccuMaxx 6-ton page.

Warren LST-3420 18ft litter spreader – high tensile steel construction with a 34” polyliner number 1 chain. This litter spreader features our standard 30” spinners, tandem axel and walking floor suspension, along with parallel hydraulic circuits. Be sure to visit our LST product page for more information about these great litter spreader options.

Warren LF-2420 11ft lime and fertilizer spreader mounted on a 2007 Freightliner M2. This stainless steel ag spreader features our number 3 chain, 30” spinners, and inverted vee configuration.See this great deal on TractorHouse! Visit the LF products page for more information on these great ag spreaders.

For more information about our current inventory, check out TractorHouse.com!

When you are ready to place your next spreader order, be sure to call us at 800.228.4842!

Read More


Litter Spreaders In Stock

Largest Inventory of Ag Spreaders Ever

LS-3420-18litter spreader in stock

Warren currently has the largest available inventory of ag spreaders ever! We have numerous litter spreaders in stock and ready for immediate delivery. Even better news – they are strategically located at several of our distribution centers across the southeast. We currently have 16ft and 18ft litter spreaders available in our Collins, MS, Birmingham, ALColumbia, SC, and Talco, TX locations!

The Warren LS-3420 is a hydraulic powered truck mounted spreader for spreading lightweight bulk materials such as: chicken litter, sawdust, shavings, compost, rice hulls, or other organic material. Our in stock LS-3420 spreaders have 30” spinners and poly floor liner, along with all our standard features. For more information on the LS-3420, visit this LINK and download our literature.

The featured litter spreader is a LS-3420-18 that is currently located in our Collins, MS, location. The truck is a 2007 Freightliner M2-106 with 286,600 miles on it. It is 33,000GVW, with 6 speed manual transmission, air ride suspension, and Cat C7/ 210 HP.

This spreader and truck is currently available for $35,500! Call us today to make this great combination your next litter spreader!

Our dedicated sales staff is ready to answer any questions you may have – be sure to mention where you saw this great deal!

Call: 800-228-4842

Read More


Please be sure to come visit Warren, Inc. at the 2015 Sunbelt Ag Expo.  We will have a Pull Type Litter Spreader, Pull Type Lime & Fertilizer Spreaders, and Chassis Mount Litter Spreader on display.  Call Warren today to let us help you spec the right litter or lime and fertilizer spreader for your application.

 

Sunbelt Ag Expo
Moultrie, GA
Oct. 20-22, 2015
Sunbelt Ag Expo

Read More


April’s spreader of the month goes to a Warren EAC-2400 mounted at Warren Truck & Trailer, Inc. in Birmingham, AL that was sold to Rainbow City, AL. This 10′ ice control spreader was mounted on an old military 6×6 truck and turned out looking great! Call Warren today for more information on our snow and ice control spreaders. Warren-Ice-Control-Rainbow-City

Read More


Warren Manufacturing, Inc. would like to thank Mike Dennis for reaching his 25th year of service.  Russell Warren (President) presents Mike Dennis (Sales Manager) with a corporate desk clock to show his appreciation.  Click image to enlarge.

Read More